Kieran Billings: New Ruins of Modulheim 2 Kickstarter Launch!

Kieran Billings: Ruins of Modulheim 2 follows on from the highly successful Ruins of Modulheim campaign bringing you more compatible pieces to add to your Modulheim set or use this set as it's own standalone set as well. You don't need to have backed the first campaign to make use of this set it just adds a whole lot more variety.

The Ruins of Modulheim 2 are modular 3d printable ruin pieces that allow you a wide array of changeability for your tabletop. Build your pieces however you would like. Use them as an underground dungeon, tabletop scatter terrain, ore create a vast set up multilayered ruins to dominate your tabletop experience. Check the full Kickstarter here

Kieran Billings: Ruins of Modulheim - 3D Printing Kickstarter

Kieran Billings: The Ruins of Modulheim are modular 3d printable ruin pieces that allow you a wide array of changeability for your tabletop. Whether you like a deserted set of frosty ruins or ruins in a sand-blown desert, these ruins are generic enough to fit your needs. Use them as ruined buildings, stacking the pieces high for a multilayered skirmish or use them as an adventure underground through some dark and misty tomb. Individual pieces also work very well as scatter terrain for your tabletop. Check the Kickstarter here

Kieran Billings: The Fortified Manor: The Lords, The Dead, The Bandits Scenery Kickstarter

Kieran Billings: This Kickstarter campaign aims to put together 3 different themes into 1. Three different digital versions of the same Fortified Manor. So, whether you are into 3d printing fantasy buildings, ruins or hideouts, this Kickstarter is for you. The Manors can be used as a complete piece or smaller individual pieces dotted about the tabletop, mix and match complete or ruined walls with complete or ruined buildings for more diversity. Choose from three different types of STL file rewards or choose them all. Thanks Kieran Check the Kickstarter here

Kieran Billings: Lord Cireneg's Sewers - 3D Printable Modular Sewer Scenery Kickstarter

Kieran Billings: Lord Cireneg's Sewers is a 3d printable modular sewer system for your tabletop gaming needs. This campaign currently includes over 100 different files (plus applicable stretch goals) to create a wide and varied set of sewers for your heroes to explore. Floor sections clip together with a dovetail system allowing for quick piecing together and pulling apart of your sewer. Connect them in any way you would like for near infinite possibilities of sewer layouts. Check the full Kickstarter here

Kieran Billings: Devious Games, Pay What you Want - Ruined Keep Kickstarter

Kieran Billings: The Pay What You Want campaign by Devious Games gives you files for a 3d printable ruin for your tabletop gaming needs. For as little as NZ$1 you can receive these files on completion of the campaign. If you are thinking about getting into 3d printing this is an inexpensive way to start this facet of the hobby. Check the Kickstarter here

Kieran Billings: Pay What You Want - Ruins of Generica: Ruined Keep Kickstarter Preview

Kieran Billings: Coming Soon: A 3d Printable Ruined Keep for your tabletop gaming or dioramas. Pay as much or as little as you would like! (NZ$1 minimum) Sign up now for a notification for when it begins. Check the preview here

Devious Games: New 3D Printable Abandoned Village of Generica Kickstarter!

Devious Games: This kickstarter campaign, brought to you by Devious Games, will supply you with enough files to fill your tabletop with an abandoned village. Initial rewards will include three cottages, one large and two smaller, a windmill, stables, a chapel and 4 trees. Each has a large footprint making them ideal for tabletop games requiring abandoned and/or ruined buildings. Check the full campaign here

Kieran Billings: Lord Cireneg's City Facades - 3D Printable Fantasy Scenery Kickstarter

Kieran Billings: Lord Cireneg's City Facades provides you with a multitude of files to create your own modular facades to line the sides of your tabletop, creating a true sprawling city feel for your games. The facades also double as an excellent backdrop for taking photos of your newly painted miniatures or to create your own dioramas. And if you missed out on the Ruins of Generica, they are available as an add-on, along with many other campaigns. Check the Kickstarter here

Kieran Billings: Under the Hill - 3D Printable Halfling Hole Facades "Pay What You Want" Kickstarter!

Kieran Billings: Under the Hill by Kieran Billings is a Pay What You Want kickstarter campaign for 3d printable STL files. Files are for facades of halfling holes scaled for 28mm halfling miniatures. At the moment 6 doorfront facades are in the pack with more to be unlocked. Other pieces are also included such as logs, chimneys and small walls. So pledge now for as little as NZ$1 (around 50p or US$0.67). Check the full Kickstarter here

Kieran Billings: Lord Cireneg's Bridge District - 3D Printable Scenery Kickstarter

Kieran Billings: Lord Cireneg's Bridge District campaign, brought to you by Devious Games, is a 3d printable Bridge District for your tabletop. Initially you will receive a bridge, bridge walls and a guardhouse, big enough to use for large scale battalions and smaller skirmish games. These pieces will be expanded on much, much further with the stretch goals, allowing you to have ruined pieces, warehouses, guildhalls, more river walls and residential buildings to adorn the top of the bridge. You don't need to limit this to being a riverside dwelling, you could make this a full scale port if you wished! Check the Kickstarter here

Kieran Billings: New The Witch's Hovel 3D Files Kickstarter

Kieran Billings: The Witch's Hovel campaign will provide you with 4 different buildings to fill out your tabletop. 1 is a large two storied building and the other 3 are smaller buildings. These buildings are great to fill out a deep dark wood, barren landscape or even an underground world. More and more stretch goals are being unlocked with alternate roofs and different furniture and scenery pieces to fill out your tabletop. Each building has an irregular shape to them creating an ominous impression that all witch homes should have. These huts do not only need to be used as the home for witches but could be used for many, many different reasons; woodcutters home, goblin houses and more. Check the Kickstarter here

Kieran Billings: Fantasy - Historical Lord Cireneg's City Scenery Kickstarter

Kieran Billings: Lord Cireneg's City is a bustling city with buildings stacked side by side to create a true feeling of a metropolis of the medieval age, suited to your medieval or fantasy setting. This is the second of multiple Kickstarter campaigns, each building upon the previous campaign of the border fort to eventually make it into a magnificent castle fit for a king. Check the Kickstarter here

Not only does this contain buildings for creating residential areas of a city but you can also create busy marketplaces, belltowers to dominate the skyline and inns for that exciting starting point for any great RPG. Pieces stack upon each other for quick assembly and disassembly. STL files are scaled for 28mm gaming.

Currently Unlocked Stretch Goals:

• Balcony

• Alternate Tower Top

• Steps Up

• Bridge

• Double Tower Entrance

• Alternate Market Piece

• Alternate Furniture

• Alleyway Arch

• Alleyway Dead End (thick and thin)

• Horizontal Room joining piece

• Low Walls

• Extra Inn Accommodation Level

• High Walls

• Alchemy Freebie

• Corner City building

• New Inn roof front

Kieran Billings: Lord Cireneg's City - 3D Printable Medieval Fantasy City Kickstarter Preview

Kieran Billings: Lord Cireneg's City is a bustling city with buildings stacked side by side to create a true feeling of a metropolis of the medieval age, suited to your medieval or fantasy setting.

Not only does this contain buildings for creating residential areas of a city but you can also create busy marketplaces, belltowers to dominate the skyline and inns for that exciting starting place for any great RPG. Pieces stack upon each other for quick assembly and disassembly. STL files are scaled for 28mm gaming but are suitable to be scaled up or down as you see fit. The date for release is the 25th of October. Preview here

Kieran Billings: Sir Cireneg's Castle - Border Fort Kickstarter Ending Soon!

Kieran Billings: Sir Cireneg's Border fort is nearing completion with less than 48 hours left to get a hoard of files for your 3D printer. Check the full Kickstarter here

These include: 9 Tower files, 12 Wall files, 4 Stair files, 12 wall angle connectors, various door and gate pieces, 1 wizard tower connector bridge, A stone Barracks with removable roof and a ladder. Plus the unlocked Stretch goals: Tiered ramparts for miniatures (x2, one each side), Lean-to with chopped wood, Wall Hoarding, Tower Hoarding, Stables, Tower to Wizard tower connector, Tower section with 3 entrances, Kitchen, Blacksmith and social goals unlocked 7 Ruins and Well.

Add On available - Battlement Ruins - $5 (with Tower ruins added for free as the $8000 Stretch Goal.) We are also nearing a big stretch goal of The lord's hall. which will be a fitting end to an epic campaign. NZ$25 gets you all of these files barring the add-ons.

Kieran Billings: Sir Cinereg's Castle - Border Fort - STL Files Kickstarter

Kieran Billings: Sir Cireneg's Border Fort is a generic castle suited to your medieval or fantasy setting. This will be the first of multiple Kickstarter campaigns, each building upon the border fort to eventually make it into a maginificent castle fit for a king. Pieces stack upon each other for quick assembly and disassembly. STL files are scaled for 28mm gaming but are suitable to be scaled up or down as you see fit. Check the full Kickstarter here

Kieran Billings: The Wizard's Tower - Expansion Sets - Printable STL Files Kickstarter

Kieran Billings: The Wizard's Tower - Expansion Sets, printable STL files is in the final hours of its kickstarter campaign. Backing this campaign can get you a modular Wizard's Tower, modular bridge with extra pieces, a set of sacrificial circle pieces and adding on $4 can get you a modular stone wall with the wall ruins (free with the add on) soon to be unlocked in the next stretch goal. More details here

Kieran Billings: The Wizard's Tower Expansions - Printable STL Files Kickstarter

Kieran Billings: The Wizard's Tower - Expansion Sets contains modular bridge pieces to print your own bridge on your home 3D printer (or by using a printing service). 

As an extra expansion to this you can also pledge for the sacrificial set if you like your wizards a bit more evil. The bridge pieces were designed to be used in conjunction with The Wizard's Tower (original kickstarter campaign) to create a grand entrance or join two towers together. But they can be used completely separately to build a bridge crossing a river or even a tall viaduct joining 2 cliff faces. 

The ruins included in the pledge make it great for creating scenic pieces on your battlefield. Perhaps a long, destroyed bridge spanning the length of your table. The sacrificial set is great for a lovely outdoor setting for your evil wizard, complete with its own pillar for captives to be tied to, sacrifical altar, floating font pouring out some gooey yuckness and a portal to some place of evil (or good, maybe some lovely fairy land). If you missed out on the original Wizard's Tower Kickstarter you can pledge here for the entire set of the Tower and the bridge or if you are a returning backer (or just want the bridge) you can pledge solely for the bridge. Check the Kickstarter here

Kieran Billings: Wizard's Tower Printable Files - Final Days!

Kieran Billings: Having reached a second stretch goal - The Wizard's Tower is now offering 9 modular pieces to print your own unique wizard's tower. Along with the 9 modular pieces come many, many smaller files to fill the tower out in style. The final stretch goal, The Bridge, will unlock up to a further 7 files for this. 

Files will become available quickly after the completion of the kickstarter as all files currently unlocked have been finished and test printed. The one and only pledge costs $10 NZD. Roughly £5.20 or $6.75 USD. A great deal for this product. Check the Kickstarter here

Kieran Billings: The Wizard's Tower - 3D printable Modular Tower System Kickstarter Launched

Kieran Billings: The Wizard's Tower contains stackable tower sections to create your own unique Wizard's Tower. Files have been scaled for 28mm miniatures but, as with all 3d printable files, you have the ability to scale them up or down to suit your gaming needs. The initial reward, costing NZ$10 (roughly  £5 or US$6.80) consists of 7 different modular tower pieces and a ladder with more pieces to be unlocked as the project progresses. 

·         Tower roof

·         Single window tower section

·         Tower section with door

·         Tower bridge (2 bridge sections link together)

·         Double window tower section

·         Windowless tower section

·         Tower base

·         and a ladder

The tower pieces can be oriented in almost any direction to provide a different look each time you game. Pledge now on Kickstarter here - The Wizard's Tower

Devious Games: Cops & Robbers Pre-Kickstarter Competition

Devious Games: Devious Games Ltd is running a Cops and Robbers Competition from March 29th 2014 through to May the 17th 2014. 

The competition is simple, all you need to do is like the Cops and Robbers facebook page. Yes that is all you need to do. For every 100 likes the page gets (up to a maximum of 1000 likes) Devious games will give away, free of charge, postage and packaging included, one copy of Cops and Robbers. If you have already liked the facebook page, Awesome!!! You've already got your entry to the competition. Spread this around as much as you can so we have more cops and robbers games to give away.

Winner's will be announced after the Kickstarter has completed on May the 18th 2014. Winners will be drawn at random from those people that have liked the facebook page. Conditions:The Kickstarter beginning on April the 20th 2014 finishing on May the 18th 2014 must raise at least the $4,000 initial funding goal.

- The winner is responsible for providing their shipping details to devious games ltd.

- The winner will be responsible for any import taxes to their respective country.

- Winners chosen are final and no correspondence will be entered into regarding this.